Pedestrian & Bicycle Traffic Count Program
To support effective bicycle and pedestrian planning in the region, NCTCOG is collecting data on bicycle and pedestrian facility usage throughout the region. Data about actual non-motorized travel volumes helps:
- Inform the public and decision makers about actual usage and travel patterns
- Analyze trends
- Evaluate the impacts of specific projects (before and after) with mobile counts
NCTCOG has mobile equipment available for loan to local jurisdictions to conduct short-term counts of bicyclists and pedestrians on either shared use paths or streets. To learn about conducting short-term counts, please review our Mobile Counter Site-Selection Best Practices Guide. To express interest in borrowing NCTCOG’s mobile counting equipment, please contact Daniel Snyder.
Annual Bicycle and Pedestrian Traffic Count Reports
2018 Report (New!)
- Permanently installed equipment on shared use paths will provide continuous 24/7 count information for both bicycles and pedestrians.
- Mobile count equipment
- Shared use paths (bicycles and pedestrians) - minimum two-week duration
- On-Street (bicycles only) - minimum two-week duration
- Sidewalks (pedestrians only) - minimum two-week duration
- NCTCOG and several jurisdictions have installed permanent equipment in the cities of Dallas, Fort Worth, North Richland Hills and Plano. In addition, short-term counts are occasionally collected as requested by partnering cities.
- Regionally significant locations and corridors (e.g. those that cross multiple jurisdictions, connect with major employment centers, education and transit facilities, etc.) that are used for transportation purposes.
- A range of urban core and suburban locations:
- Regional Veloweb shared use paths/sidepaths (not including park “loop” recreation paths)
- On-Street facilities (e.g. bike lanes and cycle tracks) – could include before and after improvement counts
- To address Mobility 2035 performance measures in active transportation
- To obtain new baseline data for purposes of updating Air Quality calculations used for measuring benefits of bicycle and pedestrian facilities
- To provide the Regional Transportation Council (RTC), other elected officials, and local jurisdictions with more informed data related to non-motorized travel volumes and routes in the region
- To establish regional count/data collection procedures and practices for consistent application by local jurisdictions/count programs throughout the region
- To serve as the regional clearinghouse for multi-modal user count data
- To support local jurisdictions in establishing and maintaining local count programs
- To establish a baseline of continuous count data in targeted regionally significant locations/corridors that are supplemented by local count programs
- To identify non-motorized commuting patterns
- To initiate non-motorized travel data collection that could be integrated with regional travel models in the future
Dallas Morning News: Biking Data Could Inform City Planning - July 20, 2014
Research and Best Practices
NCTCOG received technical assistance from the Federal Highway Administration through the Volpe Center to host a two-day peer exchange. The exchange included researchers and national representatives of active programs in geographically large and diverse regions. Read the Peer Exchange on Bicycle and Pedestrian Count Programs full report.
NCTCOG is participating with the Rails-to-Trails Conservancy in a nationwide data collection effort for the Trail Modeling and Assessment Platform (T-MAP). T-MAP is a three-year initiative by the Rails-to-Trails Conservancy to develop a set of methodologies and analytical tools to help local communities plan for urban trails. By participating in T-MAP, the Rails-to-Trails Conservancy purchased and donated two permanent counters, which were installed in Fort Worth along the Trinity Trail System maintained by the Tarrant Regional Water District. As the Conservancy performs future research and analysis, NCTCOG will be able to implement the methodologies and analysis tools for active transportation planning. For more information about the Trail Modeling and Assessment Platform, please visit Rails-to-Trails' T-MAP project website.
Staff contact: Daniel Snyder